……………….
Coord3 MCT-Plus serisi
Endüstriyel atölye ortamları için tasarlanmış büyük ölçekli cmm..
GENEL ÖZELLİKLER VE AVANTAJLAR
- Generous pad spacing sizing for optimal mechanical rigidity
- X and Y axes with pinion/rack drive system for efficient movement of main axes
- X-beams with large cross-sectional area made of stabilized steel and equipped with support system on the abutments that allow linear expansion without stress and induced deformation
- Measurement system with high-resolution (0.1µm) linear transducers and “Dual Reader” and “Dual Drive” system on longitudinal X axis
- Multi-sensor system for automatic compensation of errors due to thermal expansion of structural components.
……………….
ÇALIŞMA KOŞULLARI
- Temperature rating: 20 °C
- Temperature range: 18 – 22 °C
- Maximum hourly gradient: 0.5 °C/h
- Maximum daily gradient: 2 °C/24h
- Maximum gradient in volume: 0.5 °C/m
- Operating temperature: 15 to 35 °C
- Relative humidity for operation: 40 to 80 % (non-condensing)
- Allowable vibrations:
30 mm/s2 between 1 and 10 Hz
15 mm/s2 between 10 and 20 Hz
50 mm/s2 between 20 and 100 Hz
……………….
GEREKSİNİMLER
- Pressure: 5 Bar
- Air consumption: 100 Nl/min
- Power supply: 230 V 50 Hz or 110 V 60 Hz (± 2% single phase)
- Maximum power consumption: 10 A 1200 W
……………….
PERFORMANS
- Each COORD3 CMM is tested according to UNI EN ISO 10360-2 standards.
……………….
OPSİYONLAR
- Models and dimensions:
COORD3 MCT PLUS CMMs are available with the following measuring strokes (Y.Z mm):
20.20 / 25.18 / 25.20 / 30.20 / 30.25
……………….